It took a few months to work up the nerve to tackle this project,
but boy am I glad I did.
I started off this makeover by removing all of the pieces of wood
that were connecting these two stands.
When I took off the top board, which was the desk top,
what I found underneath was worse than I had expected.
There was a layer of contact paper covering peeling veneer.
I was disappointed because I wanted to leave the tops natural wood and
I wasn't sure if that would be possible if I removed the bad veneer,
but it had to go.
I used a tip from Larissa's blog Prodigal Pieces to remove the veneer
and it worked like a charm.
I removed the veneer from the top of both pieces and from one side of one piece.
The remaining veneer was in good condition.
I was super thrilled that the wood under the veneer on the tops
was in good condition and took stain well and looked nice.
I rubbed on two coats of Minwax wood stain.
I also added the curvy piece of wood on the back of the top
to fill in the space where the mirror used to sit when this was a vanity.
Before I could paint the bodies of these night stands
I had to glue some of the dovetail joints on the drawers and
also had to fill in some places on the front of the drawers and the sides with wood filler.
Once the glue and wood filler were dry I sanded both pieces and primed them.
Then they received two coats of paint.
I lightly distressed the nights stands and hand waxed them with a clear matte wax
which will help protect them and gives a light sheen to them.
The finishing touches included replacing two matching casters that were missing.
I totally lucked out on that part because I had recently purchased a bowl
full of vintage casters at a flea market and two of them were the right size!
I also added new glass drawer pulls from Hobby Lobby...
...and painted the inside of the drawers and lined them,
so everything is nice and clean now.
I am so glad I tackled this project!
I love how the night stands turned out.
and I'm a little more confident going into the next furniture makeover.
I took these to my booth this past weekend and I think they have already sold.
I'll admit I was sad to let these go, but we just don't have the space for them.
Have you tackled a daunting project lately?
If so, how did it turn out? I'd love to hear about it.
'til next time,